You will see two options for the USB drive. To install as UEFI-GPT you must boot the installation drive as UEFI.ĭuring POST, press F? to launch the boot menu. To install as Legacy-MBR you must boot the installation drive as Legacy Here is how to create a Windows 10 bootable USB flash drive from an ISO image using Command Prompt. Windows can be installed in two ways: Legacy-MBR or UEFI-GPT You can only install as UEFI-GPT on a computer that has UEFI BIOS and using a 64 bits OS Once you deleted all partitions and proceed the drive was converted to MBR. Go to Media Creation Tool Page for Windows 10 and download the tool (32bit and 64 bit depending on the OS of the computer that you will use to Prepare the ISO or the USB Stick) Download the tool then Double-click the MediaCreationTool圆4. That’s it! Wait for 5-6 mins & your ISO file from bootable USB is ready.Update: It's weird because I had old partitions with previously installed Windows, but I also shrank an empty partition using Windows Disk Management, and it still wouldn't let me install on this partition, but after I removed all of the partitions including the Windows partitions and formatted them, it allowed me to install Windows with the regular USB created by the Media Creation ToolĪs I explained on post #5, your drive was GPT and you were trying to install as Legacy. Download Rufus from here Click and Open rufus. After that, a small pop-up box will appear and you just have to click OK. And in Sectors To Load field type 8 and in the Developer ID type “ Microsoft Corporation“.įinally, On the left-hand side section Click on the Build button & a dialog box will appear “ Confirm Volume Label” accept the default UDF values and Press Yes to continue. Now Click on the Browse option next to the Boot Image field & then select the ETFSBOOT file from the BOOT folder present in the USB drive. Now below Options enable the Make Image Bootable checkbox. Now Click on the Advanced tab & then Click on the Bootable Disc tab on the Right-hand side section. Now Click on the Browse button in the source section and then select that bootable USB drive that you have inserted.Īfter that Click on the Destination button & then select the path where you want to save the created ISO file. Now Click on the Create image file from files/folders button. In the bios,navigate to-hard disk boot priority-,press -Enter-and change the order of listed drives,making sure the usb is now first.
And after installation is completed start this software & Insert your USB drive into the Pc. Shutdown the pc,plug in the usb and restart. Download and Install ImgBurnĭownload & Install Imgburn software from the given link. In this tutorial, I will be using a USB to ISO software called ImgBurn.
0 kommentar(er)
